Locate the interior power distribution panel under the dashboard on the passenger side and match each numbered slot with the printed legend before removing any component. Use a multimeter to verify continuity instead of relying only on visual inspection.
The engine bay unit contains high-current links, typically rated from 30A to 60A, supporting systems such as cooling fans, ABS module, and charging circuit. Disconnect the battery negative cable before handling these elements to prevent short circuits.
Inside the cabin, lower-rated inserts between 5A and 20A control lighting, audio system, and electronic modules. Follow the numbering grid carefully since adjacent positions may serve different systems, and incorrect placement can disable key functions.
Inspect контакты for corrosion, discoloration, or looseness, as these issues can cause intermittent faults even when the metal strip appears intact. Clean terminals and ensure firm seating to maintain stable electrical flow.
2006 Chevy Equinox LS Fuse Box Diagram with Circuit Layout and Locations
Check the engine bay power distribution panel first and match each numbered slot with the legend on the cover, then confirm voltage with a test light before removing any component.
This SUV uses two main panels: one under the hood for high-load systems and another inside the cabin for electronics. The engine compartment unit typically includes 30A to 60A links for cooling fans, ABS module, and charging circuit, while the interior panel contains 5A to 20A inserts for lighting, audio, and control modules.
Each numbered position corresponds to a specific circuit, such as fuel pump relay, ignition supply, or power accessories. Incorrect placement can interrupt system operation or trigger warning indicators, so always cross-check with the panel legend.
Inspect terminals for discoloration or loose контакты, as these signs indicate overheating or poor connection. Clean and reseat components firmly to maintain stable electrical flow across all systems.
Engine compartment fuse box layout with slot numbers and relay mapping
Remove the cover of the underhood power distribution unit and align each numbered cavity with the legend printed inside the lid, then verify power at both terminals using a test light before pulling any component.
The layout follows a structured grid where lower-numbered slots usually connect to primary systems such as ignition feed, alternator output, and engine control modules, while higher numbers are assigned to auxiliary loads like cooling and emission systems.
Relay placement and function
Relays are mounted рядом with the main slot grid and share the same numbering reference. They control high-current devices such as radiator fans, starter circuit, and fuel delivery by switching power without overloading control wiring.
Slot inspection and verification
Check each position for continuity, correct amperage rating, and signs of overheating such as melted plastic or discoloration. Loose контакты or oxidation can cause intermittent faults, so clean terminals and ensure firm seating after inspection.