Locate the rear panel by opening the storage compartment and removing the side access cover. Ensure all power is off before handling connections to avoid shorts or damage.
The panel contains multiple circuit points for tail lights, interior lighting, and auxiliary systems. Mark each connection before disconnecting to maintain correct routing when reassembling.
Check each relay by pressing the test button or swapping with a known working unit. Inspect wiring for corrosion or fraying to prevent intermittent faults and voltage drops.
Replace any worn connectors with automotive-grade terminals. Use dielectric grease on pins to improve conductivity and resist moisture intrusion.
Rear Electrical Panel Guide for 2014 Charger
Access the rear electrical panel by opening the storage area and removing the side access cover. Disconnect the main power line before inspecting circuits to prevent shorts or accidental shocks.
The panel contains relays and connectors for tail lights, interior lighting, and auxiliary systems. Label each wire and terminal to ensure correct reconnection and avoid miswiring that can cause malfunctions.
Test each relay using a multimeter or by swapping with a functioning unit. Inspect connectors and wires for corrosion, fraying, or loose pins and replace any compromised parts with quality terminals and dielectric grease to maintain reliable electrical performance.
Trunk Panel Location and Access Steps
Locate the rear electrical panel behind the side lining of the storage compartment. Remove the fasteners securing the cover using a flathead screwdriver or trim tool to gain clear access to connectors and relays.
Once the cover is removed, identify the main feed wires and circuit modules. Mark each connection point to ensure correct reassembly and prevent misrouting during maintenance.
Check for any clips or tabs that lock the panel in place and release them carefully. Do not force components as this can damage plastic mounts or wiring harnesses, potentially creating shorts or connection failures.
After inspection or replacement, reinstall the cover by aligning tabs and fastening screws securely. Test all rear electrical functions such as lighting, sensors, and auxiliary circuits before closing the storage area to confirm proper operation.