Locate the main electrical distribution unit in the engine bay before checking any circuit issue. This vehicle uses multiple protection blocks, with the primary one positioned near the battery and secondary units inside the cabin. Opening the cover reveals a numbered layout linked to a reference chart that identifies each circuit.
Each protective element is rated by amperage, commonly ranging from 5A to 40A, and marked with color coding for quick identification. Always match the exact rating during replacement to prevent wiring damage or malfunction of connected components. A broken or burned internal strip indicates failure and requires immediate replacement.
The interior unit, usually located beneath the dashboard, handles lower load systems such as lighting, audio, and control modules. Using the layout reference allows accurate fault tracing and reduces unnecessary removal of working components during diagnostics.
JZX100 Fuse Box Diagram
Check the printed layout inside the electrical distribution cover to identify the correct slot before removing any protective link. Each position is numbered and tied to a specific circuit such as fuel system, ignition, lighting, or control modules.
The arrangement is grouped by function, with higher amperage elements placed closer to relay sections and lower-rated components organized in rows for interior systems. This structure allows quick identification of problem areas when a specific system stops working.
Understanding Circuit Assignments
Use the numbering system to match each slot with its function. Engine-related circuits are typically assigned to higher load positions, while cabin electronics are linked to smaller rated components. Cross-checking the reference chart prevents removal of unrelated parts.
Inspection and Replacement Guidelines
Remove the component using a puller tool and inspect the internal metal strip for breaks or burn marks. Test continuity with a multimeter to confirm failure before installing a replacement. Always use the same amperage rating to maintain proper circuit protection.
Accurate use of the layout reference combined with careful inspection helps isolate electrical faults quickly and reduces unnecessary disassembly.
Exact Fuse Box Locations in Engine Bay and Interior Cabin Areas
Open the hood and locate the main electrical distribution unit near the battery on the driver side. This housing contains high-current protection elements and relays responsible for engine control, cooling fans, and ignition systems. Release the clips on the cover to access the internal layout and reference chart.
Inspect the rear section of the engine bay close to the firewall for additional relay blocks. Some configurations include a secondary unit that supports auxiliary systems and shared circuits. Ensure the area is clean before opening to prevent contamination of контактов.
Interior Cabin Location
Check beneath the dashboard on the driver side for the interior circuit panel. This unit is typically hidden behind a removable trim cover and handles lower load systems such as lighting, audio, and control switches. Use a flashlight to clearly read slot numbers and markings.
Accessing both engine compartment and cabin sections allows full inspection of the vehicle’s electrical network, helping isolate faults tied to specific systems without removing unnecessary components.