Locate the interior power distribution unit near the driver-side dashboard and verify each circuit using the printed layout before replacing any damaged insert. Always match the amperage rating shown on the component to prevent wiring damage or malfunction.
This vehicle uses multiple protection units that divide electrical loads across lighting, control modules, infotainment, and auxiliary systems. Each slot is assigned to a specific circuit, typically marked with values from 5A to 40A depending on current demand.
The cabin unit handles most electronic systems, while the engine compartment unit supports high-load components such as cooling fans, ABS, and power steering. Identifying the correct layout helps isolate faults like non-working accessories or intermittent power loss.
Test continuity with a multimeter instead of relying only on visual checks, as internal breaks are not always visible. Loose terminals, oxidation, or heat marks near contacts often indicate the real source of failure.
Renault Kadjar Fuse Box Diagram and Circuit Reference
Match each numbered slot in the interior distribution unit with its assigned circuit using the cover chart, then confirm amperage before installing a replacement insert. Typical ratings range from 5A for control modules and lighting up to 30A–40A for power outlets, seat motors, and HVAC blower circuits. Incorrect values can lead to overheating or repeated failures.
Use this quick check process:
- Identify the slot number from the layout chart
- Check amperage printed on the insert
- Test continuity with a multimeter
- Verify voltage on both sides under load
- Inspect contacts for heat marks or oxidation
High-current circuits are located in the engine compartment distribution unit and support systems like cooling fans and ABS, so inspect both locations when diagnosing electrical faults.
Exact Fuse Box Locations in Renault Kadjar Cabin and Engine Bay
Check the driver-side lower dashboard near the glove compartment edge or side trim, where the main interior distribution unit is hidden behind a removable cover.
Access the cabin unit by opening the door fully and removing the side panel on the dashboard end. The cover is usually clipped in place and can be pulled off without tools, revealing the slot array and layout chart.
This interior module handles most low and mid-current circuits, including infotainment, lighting, control modules, and accessory systems. Labels are printed on the reverse side of the cover for quick reference.
A secondary interior unit may be positioned deeper under the dashboard or near the passenger side, depending on equipment level. This section typically includes additional relays and protection elements for electronic systems.
Engine Bay Location
Open the hood and locate the main power distribution center near the battery or along the right side of the engine compartment.
Release the locking tabs and lift the cover to access high-current circuits such as cooling fans, ABS, and steering assist. Larger cartridge-style inserts and relays are grouped here.
Ensure all covers are securely reinstalled after inspection to protect contacts from moisture and maintain stable electrical connections.