Locate the interior panel on the driver side and verify each slot using the printed chart on the cover before removing any protective insert.
The cabin-mounted block typically contains low to mid-amperage circuits linked to lighting, infotainment, climate control, and onboard modules. Standard ratings range from 5A to 30A, with smaller values assigned to sensors and control units, while higher values support power outlets and blower motors.
Under the hood, the power distribution unit handles high-load systems such as cooling fans, ABS, and ignition supply lines. These positions often use 40A to 60A strip-type links, which differ from blade-style inserts found inside the cabin. Matching the correct rating prevents overheating and wiring damage.
Inspect each element visually by checking the metal bridge through the transparent housing. A broken or darkened strip indicates failure. Replace only with identical amperage to maintain stable circuit protection and avoid repeated electrical faults.
2013 Jetta TDI Fuse Diagram and Circuit Layout Guide
Use the panel legend inside the cover to match each slot with its circuit before pulling any protective element.
The interior electrical center is divided into numbered rows, each linked to a specific system. Common assignments include lighting, radio unit, climate controls, and onboard control modules.
- Slot SC1–SC5: 5A–10A, interior lights and control switches
- Slot SC6–SC10: 10A–15A, infotainment and accessory ports
- Slot SC11–SC15: 15A–20A, HVAC system and washer pump
- Slot SC16–SC20: up to 30A, power windows and seat adjustment
Under-hood distribution is arranged separately with higher load capacity and uses strip-style links instead of blade inserts.
- Cooling fan: 40A–50A
- ABS pump: 30A–40A
- Main power supply: 50A–60A
- Glow plug control: 40A
Each slot is marked with a code such as SC or SB, which corresponds to a chart printed on the cover or service manual.
Check the metal strip through the transparent casing; a visible break or dark spot indicates failure.
Always install a replacement with identical amperage to prevent overheating or wiring damage.
Secure each insert firmly; loose contact points may cause intermittent loss of power across multiple systems.
Dashboard Fuse Panel Map with Circuit Names and Amp Ratings
Remove the side cover of the dashboard and read the printed chart to identify each slot before pulling any insert.
The interior panel uses labeled positions such as SC1 through SC20, each tied to a specific function. Low-current circuits handle sensors, control modules, and lighting, while mid-range circuits support devices like audio units and climate controls.
Typical assignments include 5A for interior illumination and switch logic, 10A for control modules and infotainment memory, 15A for accessory outlets and diagnostic connectors, and 20A–30A for blower motor and window regulators.
Each position number corresponds to a chart printed on the panel cover; mismatching positions leads to incorrect diagnostics and unnecessary part replacement.
Inspect the internal metal strip through the transparent housing; any break or discoloration indicates a failed insert that must be replaced with the same amperage rating.
Press each insert firmly into its slot after inspection; loose seating can interrupt current flow and cause random shutdown of dashboard-controlled systems.