Locate the main power center under the hood on the driver side, just behind the battery tray. Use the integrated tab to lift the cover and expose all circuit holders.
Check each slot for its amperage rating stamped on the carrier. This van uses a combination of standard and mini holders, so verify compatibility before replacing any unit.
For interior circuits, access the panel beneath the dashboard on the passenger side. Slots controlling lighting, climate, and infotainment are labeled clearly with printed legends on the housing.
Replace any blown elements with the exact amperage to avoid damage to sensitive modules. Keep a small set of spares for emergency repairs during long hauls.
Relays are positioned on the outer edges of both engine and cabin panels. Test each by swapping with a matching unit if a function fails, ensuring correct operation without pulling the entire panel.
Electrical Panel Layout for the 2019 Van
Access the primary power hub under the hood on the driver side near the battery. Lift the cover carefully to reveal clearly labeled circuit holders and relays for engine management, headlights, and starter circuits.
Interior panel access is located beneath the passenger side dashboard. Slots for climate controls, cabin lighting, and entertainment modules are grouped and color-coded for easy identification and replacement.
Verify each slot’s amperage rating before installation to avoid overloading sensitive electronics. Standard and mini holders coexist in this layout, so check the size and orientation before inserting a new element.
Relays for high-current systems are mounted along the edges of both panels. Testing involves swapping with a matching unit rather than removing the entire panel, minimizing the risk of accidental disconnections.
Accessing the Engine Compartment Power Center
Open the hood and locate the main power assembly on the driver’s side near the battery. Ensure the vehicle is off and the key is removed before lifting the protective cover to expose the circuit slots.
Check for the locking tabs along the edges of the housing. Depress these tabs evenly to prevent cracking the cover or dislodging internal relays during access.
Refer to the color-coded layout inside the lid to identify circuits for ignition, headlights, and cooling fans. Matching labels help avoid confusion when replacing or testing individual components.
Remove only the target holder or relay rather than disturbing the entire assembly. This reduces the risk of accidental disconnections that could affect multiple systems.
Inspect terminals and connectors for corrosion or looseness before inserting replacements. Use dielectric grease on exposed metal contacts to improve conductivity and prevent oxidation over time.
Secure the cover firmly after maintenance to maintain protection against dust, moisture, and vibration. Verify that all circuits operate correctly by testing lights, engine sensors, and starter functionality before closing the hood completely.