Check both electrical panels before diagnosing any power issue–one is located in the engine compartment near the battery, while the second sits inside the cabin under the dashboard on the driver side. Each panel distributes power to specific systems such as lighting, ignition, and onboard electronics.
Use the printed layout on the cover to match slot numbers with components. Lower-rated inserts like 10A or 15A typically protect sensors, audio, and control units, while higher ratings such as 20A to 40A handle motors, cooling fans, and power-operated features.
Inspect each insert visually and verify with a multimeter if needed. A broken internal strip indicates failure, but continuity testing confirms it. Always replace with the same amperage value to prevent overheating or wiring damage.
Check relay units in the same panel if a system stops working without a damaged insert, since these components control switching for larger electrical loads. Swapping with an identical relay helps identify faults quickly.
2008 Pontiac Vibe Fuse Box Diagram with Panel Locations and Circuit Details
Locate the main power distribution panel in the engine compartment near the battery and remove the protective cover to access high-amperage circuit protection and relays.
Check the interior panel under the dashboard on the driver side, where lower-rated inserts manage cabin electronics such as audio system, instrument cluster, and power outlets.
Follow the numbering printed on each cover insert to match slots with assigned systems without removing multiple components.
Typical circuit distribution
- 10A–15A for sensors and lighting
- 20A–30A for motors and accessories
- 40A and above for high-load systems
Inspect each insert for a broken internal strip and confirm with a multimeter if visual inspection is unclear.
Check relay units located рядом in the same panel, as they control switching for systems like cooling fans and ignition circuits.
Keep spare inserts and a puller tool available to handle electrical issues without delay.
Exact locations of interior and engine compartment fuse panels in 2008 Vibe
Open the hood and inspect the area next to the battery on the driver side–the main power distribution unit is housed in a rectangular plastic case with a snap-on lid. Release the clips to access high-capacity circuit protection and relay components.
Check along the inner fender in the engine compartment for additional relay blocks grouped near the main unit, depending on equipment configuration.
Move inside the cabin and locate the panel beneath the dashboard on the driver side. It sits behind a removable cover integrated into the lower dash or kick panel area.
Pull the interior cover straight outward to expose smaller circuit protection elements assigned to lighting, audio, and dashboard systems, keeping the surrounding area clear for quick access during troubleshooting.